Intermec 6100 참조 가이드

R

8. After the initial double beep, hold the [I/O] key down until the following

ROM DOS 5 Start from" menu comes up.

ROM DOS 5

Start from:
1) Memory card 1 =A:
2) Memory card 2 =B:
3) RamDrive      =C:
4) RomDrive      =D:

9. Press the  4" key to choose option 4.  The 6100 Computer should boot to

the Norand Utilities screen.

10. Press YES at the Norand Utilities copyright screen to open the main menu.

The Norand Utilities program supports a variety of communication options

for loading application programs.  Each option is explained later.
Press option 2 to select a communication option from a drop down menu,

then press option 1 from the main menu to initiate a communication sesĆ

sion.  For getting started, the most common option is to use INTERSVR.
For a complete description of navigating the screens in the Norand Utilities

program, refer to the PEN*KEY Model 6100 User's Guide.

11. Prepare the CONFIG.SYS and AUTOEXEC.BAT files for initial program

load.  For an example CONFIG.SYS file or an example AUTOEXEC.BAT

file, refer to Appendix A, Sample Configuration Files.  At a minimum, the

CONFIG.SYS file needs the following lines: 

device=d:\elanapm.exe
device=d:\nordospm.exe

The content of these configuration files depends on the type of application

being loaded.  Examples for DOS and Windows can also be found on the

Tool Kit diskettes.

12. Using one of the communication options, described later in this section,

transfer the application program files to the 6100 Computer.  Following a

successful communication session, the Norand Utilities program executes

the application program files.

Figure 1Ć1