Intermec ck1 사용자 가이드
Chapter 5 — Managing the CK1
CK1 Handheld Computer User’s Manual
113
5 Under COM Port, choose the COM port that the CK1 is
connected to.
6 Click OK to set up the options you chose. The DNW
application window appears.
7 Choose Serial Port > Connect. The DNW application is
now connected to the CK1. You are now ready to upgrade
the firmware
the firmware
To load the flash writer, NOR flash, and NAND flash
1 Copy your applications from the CK1 to the PC. For help,
see “Transferring Files From the CK1 to a PC” on page 118.
2 Place the CK1 in the serial dock, and turn off the CK1.
3 On the CK1, press and hold 5, and press the p key to turn
on the CK1.
4 On the PC, press and hold Esc.
5 On the CK1, press F1 and then 2.
6 On the PC, release Esc. The DNW application window
displays the Bootloader menu.
Note: The Bootloader menu may look different depending
on what version of firmware is loaded on the CK1.
on what version of firmware is loaded on the CK1.