Intermec cn2a 사용자 가이드

1. Backlight 

 

Test 

Verifies that the backlight is 
working properly by turning it 
off, on, and testing each dim 
level.

When you start the Backlight Power 
Control test, the backlight turns off. 
Tap near the top of the screen to turn the 
backlight on again so you can indicate if 
the test passed or failed.

2. Battery 
Information 

Displays the charge levels for the 
main battery and the backup 
battery. Also indicates if AC 
power is detected.

Tap X to exit the test.

3. Display 

 

Test 

Verifies that every pixel on the 
CN2A screen is working properly.

When each test action begins, a message 
explains what you should see on this test 
display.
Press Enter or tap X to dismiss each 
message. Press Enter or tap the screen you 
finish examining each test display.

4. Hardware 
Configuration 

Reads, verifies, and displays 
information about the hardware 
configuration. Also displays the 
version of the operating system 
(OS) running on your CN2A. 

You may be asked to provide this 
information if you contact Intermec 
Product Support. 
Tap X to exit the test.

5. Memory 
Information 

Displays information about the 
RAM, which is divided into 
program memory and storage 
memory.

Tap X to exit the test.

6. Networking 
Test 

Displays your IP address and 
MAC address, and validates your 
network connection.

Tap X to exit the test. 

7. Audio Test 

Verifies that the audio sounds are 
working correctly.

Tap X to exit the test.

8. Touch Screen 
Test 

Verifies that the touch screen is 
working correctly. 

A message directs you to draw on the 
screen with the stylus. Tap X to dismiss 
the message, and a white screen appears 
for you to draw on. When you finish 
drawing, press any key to exit. If the 
message appears again, tap X at the top of 
the screen to exit the test.

9. LED Test 

Verifies that the LED is working 
correctly.

Tap X to exit the test.

10. Keypad 

 

Test 

Verifies that each key is working 
correctly. 

Tap X to exit the test.