Intermec cn2a 사용자 가이드
Chapter 1 — Using the CN2A Mobile Computer
CN2A Mobile Computer User’s Manual
29
3
Connect the CN2 power supply (Model 074246) to the
power port on the modem dock. Then connect the CN2
power supply to an AC power source.
power port on the modem dock. Then connect the CN2
power supply to an AC power source.
4
Configure the CN2A to provide power to the keyboard:
a
Tap Start > Settings > Control Panel.
b
Double-tap the Utilities icon.
c
Set USB Host Power to On When Powered.
d
Tap OK to close the Utilities window.
e
Tap
X
to close the Control Panel window.
5
Place the CN2A into the modem dock.
6
Open an application like WordPad and begin typing. If the
characters you type do not appear on screen, see page 99 for
troubleshooting ideas.
characters you type do not appear on screen, see page 99 for
troubleshooting ideas.
USB
port
port
Power
port
port
Phone
port
port
Keyboard
port
port
You must use only the Intermec power supply approved for
use with the CN2. Using any other power supply will
damage the CN2.
use with the CN2. Using any other power supply will
damage the CN2.
Note: If you cannot connect the modem dock to an AC power
source, you can configure the CN2A to use its battery to power
the USB keyboard. In Step 4c, set USB Host Power to Always
On. However, you will have to charge the CN2A battery more
often.
source, you can configure the CN2A to use its battery to power
the USB keyboard. In Step 4c, set USB Host Power to Always
On. However, you will have to charge the CN2A battery more
often.