Intermec ck31g 사용자 가이드
Chapter 1 — Using the CK31G Handheld Computer
CK31G Handheld Computer User’s Manual
21
To scan a bar code label with the 2D area imager
1
Press I to turn on the CK31G.
2
Point the scanner window at the bar code label and hold the
CK31G steady a few inches from the label.
CK31G steady a few inches from the label.
3
Press the Scan button on the keypad or pull the trigger on a
handle and center the red aiming beam over the bar code
label.
handle and center the red aiming beam over the bar code
label.
CK31
Scan
button
NTERME
C
*INTERME
C* C
Good Read
light (green)
Scanning: Using the 2D imager to scan a bar code label.
The imager flashes repeatedly while it is trying to read a bar
code. The aiming beam is smaller when the imager is closer to
the bar code and larger when it is further away.
code. The aiming beam is smaller when the imager is closer to
the bar code and larger when it is further away.
When the CK31G successfully reads a bar code label, you
hear a high beep and the green Good Read light turns on
briefly.
hear a high beep and the green Good Read light turns on
briefly.
4
Release the Scan button or the trigger.