Intermec nx 참조 가이드
Data reformatting
MB/NX/RM/00/E/970131
41
2.b.1. Define the reformatting sequence
Use the decimal values of the ASCII character codes to indicate the reformatted
transmission sequence for the barcode data characters you read and scan End Selection to
finish (
transmission sequence for the barcode data characters you read and scan End Selection to
finish (
Ð
ASCII character codes
).
ASCII character SOH (01h) corresponds to the first decoded data character, ASCII
character STX (02h) corresponds to the second decoded data character, etc.
character STX (02h) corresponds to the second decoded data character, etc.
You can enter the same ASCII character more than once if you want to repeat an input
character a number of times.
character a number of times.
If you do not enter the ASCII position codes for one or more of the characters received,
these characters will be removed from the transmission sequence.
these characters will be removed from the transmission sequence.
Example
•
“<SOH> <STX> <ETX> “ indicates that you want to transmit the first three characters in
the same order that you receive them.
the same order that you receive them.
•
For the same input string, “<STX > <SOH>“ indicates that you want to transmit the
second character received before the first character and you do not want to transmit the
third character.
second character received before the first character and you do not want to transmit the
third character.
Define Reformatting Sequence—SOH (01h) to DEL (7Fh)