Intermec 1470 사용자 가이드
1470/1471 Imager User’s Manual
4-56
UPC E1 On/Off
Most UPC bar codes lead with the 0 number system. For these codes, use the UPC E0
selection (see “UPC E0 On/Off” earlier in this chapter). If you need to read codes that
lead with the 1 number system, use the UPC E1 selection.
selection (see “UPC E0 On/Off” earlier in this chapter). If you need to read codes that
lead with the 1 number system, use the UPC E1 selection.
In the UPC/EAN tab of Visual Menu, choose Version E1 Decoding On under UPC
Version E. Click the Write Settings to Device button (
) to send the new setting to
the imager.
Or scan one of the following bar codes. The default setting is marked with an asterisk
(*).
(*).
On
Off
*