Megxon s300 사용자 가이드
13
•
FLASH Setting
1.To set the Flash, press the Five-Way Switch to the Left to select the desired Flash
setting. You will have the three types of Flash settings: Flash Off, Auto Red-eye
reduction, and Flash Force On. Once you’ve set your Flash setting, proceed with
your picture taking.
setting. You will have the three types of Flash settings: Flash Off, Auto Red-eye
reduction, and Flash Force On. Once you’ve set your Flash setting, proceed with
your picture taking.
•
Self Timer
To set the self timer under the capture mode, please press Five-Way Switch to the
Right button once to activate the self timer. You will have ten seconds to get ready
for your pose. The countdown number will be displayed on the LCD as well followed
by a beep sound.
Right button once to activate the self timer. You will have ten seconds to get ready
for your pose. The countdown number will be displayed on the LCD as well followed
by a beep sound.
•
Shooting Continuously Setting
Pictures can be shoot in successive orders.
1.
Keep pressing the right button twice until Shooting Continuously icon appears on the LCD
Display.
Display.
2.
Keep pressing the shutter button to activate Shooting Continuously. Then release the shut-
ter after the three sequences have been taken.
ter after the three sequences have been taken.
Flash Off
The Flash will not fire.
Auto Red-eye
reduction
reduction
The Flash will fire depending on
the light source. Red eye deduc-
tion will also be active when
needed. (Flash will blink twice,
picture will be shot when the sec-
ond flash is fired.)
the light source. Red eye deduc-
tion will also be active when
needed. (Flash will blink twice,
picture will be shot when the sec-
ond flash is fired.)
Flash Force On
The Flash always fire with every
shot.
shot.