SATO CG412 사용자 가이드
Section 3: Operation and Configuration
Page 3-4
CG4 Series Operator Manual
3.3 USER TEST PRINT MODE
This mode produces test labels for diagnostic purposes.
Preparation:
Make sure the media or ribbon (if required) are properly loaded in the printer.
Make sure the media or ribbon (if required) are properly loaded in the printer.
Notes:
• If you missed the chance to release the FEED/LINE button in step 2 above, just keep holding the
FEED/LINE button and wait for the next cycle.
• If you released the FEED/LINE button at the wrong ON LINE (POWER) or ERROR indicators, just turn off
the power and restart the procedure.
• The printer will continuously print the user test labels until the FEED/LINE button is pressed. The printing is
paused and will resume printing if the FEED/LINE button is press again.
To terminate the User Test Print mode
First, ensure that you have pressed the FEED/LINE button to pause the test printing, then press POWER to
turn off the printer.
First, ensure that you have pressed the FEED/LINE button to pause the test printing, then press POWER to
turn off the printer.
Printer start-up
While pressing
FEED/LINE button, press
and release POWER
button. Keep holding
FEED/LINE button.
FEED/LINE button, press
and release POWER
button. Keep holding
FEED/LINE button.
Green light
Release FEED/LINE
button when ON LINE
(POWER) indicator
changes to green light
and single short beep
sound is heard.
button when ON LINE
(POWER) indicator
changes to green light
and single short beep
sound is heard.
Blinking green light
Press FEED/LINE button
to start test printing.
to start test printing.
User Test Print mode
is activated and then
paused.
is activated and then
paused.
Green light
User Test Print start
and print continuously.
and print continuously.
Press FEED/LINE button
to pause the test printing.
Press again to resume.
to pause the test printing.
Press again to resume.
User Test Print paused.
Blinking green light
1
2
3
Printer status
Procedures
(The printer will cyclically
advance to next mode as
long as the FEED/LINE
button is held down.)
advance to next mode as
long as the FEED/LINE
button is held down.)
Off
ON LINE (POWER)
indicator
ERROR
indicator
Buzzer
User Test Print mode.
Off
Off
Off
Off
One short
beep
beep
FEED/LINE
released
released
Red light