Lexicon MC-12 사용자 가이드
Lexicon
MC-12 Serial Communications Protocol
MC-12 Serial Communications Protocol
Printed on: 07/13/05
7.3.6 Get Zone 2 Status (MC-12, MC-1)
This command is a request to MC-12 for current Zone 2 Status. MC-12 will respond with “Zone2 Status
Packet”.
This command has been maintained for backward compatibility with MC-1. In order to maintain backward
compatibility, the MC-12 Parameters have been mapped to the MC-1 parameters as described in each Data
Description. MC-12 users should be using the command described in
Packet”.
This command has been maintained for backward compatibility with MC-1. In order to maintain backward
compatibility, the MC-12 Parameters have been mapped to the MC-1 parameters as described in each Data
Description. MC-12 users should be using the command described in
7.3.6.1 Command Packet Description
Application Header:
Command DC_CMD_GET_ZONE2_STATUS 0x17
Data Count 0
Data Count 0
0x00
Application Data:
N/A
7.3.6.2 Zone2 Status Response Packet
Application Header:
Command DC_RESP_ZONE2_STATUS
0x82
Data Count 5
0x05
Application Data:
Data[0] Zone2
Volume
nn
Data[1]
Assigned Zone 2 Input
nn
Data[2]
Zone2 Mute Active
nn
Data[3] Record
Active
nn
Data[4] Zone2
Balance
nn
7.3.6.3 Data Description
Zone2 Volume:
Data Type:
Unsigned 8 bit integer.
Maximum Value: 92
Conversion:
Conversion:
0 = -80 dB
92
=
+12
dB
Assigned Zone 2 Input:
Indicates the Zone 2 input that is currently assigned for the zone 2 outputs.
Data Type:
Data Type:
Unsigned 8 bit integer.
Definition/Conversion:
Zone2 Mute Active:
Data Type:
Boolean.
TRUE:
Zone2 Outputs are active.
FALSE:
Zone 2 Outputs are not active.
Record Active:
Data Type:
Boolean.
TRUE:
Record Zone Output is active
FALSE:
Record Zone Output is not Active.
© 2005 Harman Specialty Group All rights reserved.
23 of 106