Q-See qsipo26x 사용자 가이드
27
Step 2
－
－
－
－Pendant bracket connection chassis installation
Connect control cable, video cable, power cable and network cable through the
chassis centre hole. Fasten rubber pad on the suspended chassis. Insert the chassis
four holes into expansion bolts and use screw cap and gasket to fix firmly. Wipe
glass glue (not supplied) at the string holes to enhance waterproof ability.
Note:
Please make sure the cable is long enough to pull through the hole.
chassis centre hole. Fasten rubber pad on the suspended chassis. Insert the chassis
four holes into expansion bolts and use screw cap and gasket to fix firmly. Wipe
glass glue (not supplied) at the string holes to enhance waterproof ability.
Note:
Please make sure the cable is long enough to pull through the hole.
Step 3
－
－
－
－Suspended bracket installation
Connect the cables through the bracket centre, and circle the pendant bracket into
the fixed chassis. Use one slot to fasten the screw firmly.
Note: please add anaerobic adhesive to the screw for outdoor use.
the fixed chassis. Use one slot to fasten the screw firmly.
Note: please add anaerobic adhesive to the screw for outdoor use.
Step 4
－
－
－
－Network dome installation
Open the dome hinged box and connection cables into the dome. Please refer to
chapter two for network speed dome installation.
chapter two for network speed dome installation.