Acer 710 사용자 설명서
Frequently-Asked Questions
102
User’s Guide
The infrared port does not work.
Check the following:
❑
Make sure that the infrared ports of the two devices are
facing each other (+/- 15 degrees) a maximum of 1 meter
apart.
facing each other (+/- 15 degrees) a maximum of 1 meter
apart.
❑
Make sure there is a clear path between the two infrared
ports. Nothing should be blocking the ports.
ports. Nothing should be blocking the ports.
❑
Make sure you have the appropriate software running
on both devices (for file transfers) or you have the
appropriate drivers (for printing to an infrared printer).
on both devices (for file transfers) or you have the
appropriate drivers (for printing to an infrared printer).
❑
During POST, press F2 to access the Setup Utility. Go to
the Advanced screen and verify that the infrared port is
enabled.
the Advanced screen and verify that the infrared port is
enabled.
❑
Make sure both devices are IrDA-compliant.
I want to set up my location to use the internal modem.
To properly use your communications software (e.g.,
HyperTerminal), you need to set up your location:
HyperTerminal), you need to set up your location:
1. Open the Windows 98/Windows 95 Control Panel and
double-click on the Modems icon.
2. Click on Dialing Properties and begin setting up your
location.
Refer to the Windows 98/Windows 95 manual.
700-e.book : 700-6e.fm Page 102 Tuesday, July 28, 1998 10:24 AM