Acer 4050 사용자 가이드
2 Customizing my computer
48
English
Re-install bundled software without CD
Acer eRecovery stores pre-loaded software internally for easy driver
and application re-installation.
and application re-installation.
1
Boot to Windows XP.
2
Press <Alt> + <F10> to open the Acer eRecovery utility.
3
Enter the password to proceed. The default password is six 0s.
4
In the Acer eRecovery window, select “Recovery actions” and click
“Next”.
“Next”.
5
In the Recovery settings window, select “Reinstall applications/
drivers” and click “Next”.
drivers” and click “Next”.
6
Select the desired driver/application and follow the instructions on
screen to re-install.
screen to re-install.
At first launch, Acer eRecovery prepares all the needed software and
may take few seconds to bring up the software content window.
may take few seconds to bring up the software content window.
Change password
Acer eRecovery is protected by a password that can be changed by the
user. The password is used by both Acer eRecovery and Acer disc-to-
disc Recovery. Follow the steps below to change the password in Acer
eRecovery.
user. The password is used by both Acer eRecovery and Acer disc-to-
disc Recovery. Follow the steps below to change the password in Acer
eRecovery.
1
Boot to Windows XP.
2
Press <Alt> + <F10> to open the Acer eRecovery utility.
3
Enter the password to proceed. The default password is six 0s.
4
In the Acer eRecovery window, select “Recovery settings” and click
“Next”.
“Next”.
5
In the Recovery settings window, select “Password: Change Acer
eRecovery password” and click “Next”.
eRecovery password” and click “Next”.
6
Follow the instructions on screen to complete the process.
Note: If the system crashes, and will not boot to Windows, users
can run Acer Disc-to-Disc to restore the factory default image
under DOS mode.
can run Acer Disc-to-Disc to restore the factory default image
under DOS mode.