Fedders tce3002a 사용자 설명서

다운로드
페이지 32
2
WARNING: To reduce the risk of electric shock,
120V/60Hz models have a polarized plug (one blade
is wider than the other). This plug will fit in a
polarized outlet only one way. If the plug does not
fit fully in the outlet, reverse the plug. If it still
does not fit, contact qualified personnel to install
the proper outlet. Do not alter the plug in any way.
SAFETY NOTE: Do not use this electronic air clean-
er when oxygen is being used or when com-
bustible gases are present.
Getting Started
The Charcoal Filter is sealed in a plastic bag taped to back of the
Air Purifier. To install the Charcoal Filter, remove the Filter Access
Cover by lifting upward (see figure 3). Lower the Charcoal Filter
into the filter rails located on the rear of the Electronic Filter. 
The data label is located under the Filter Access Cover and defines
electrical specifications and power consumption. Replace the Filter
Access Cover and plug the unit into a standard household electrical
outlet. Your air cleaner is now ready for operation.
This Air Purifier can be used in any room in the house or in any
workspace as long as air can freely circulate into the upper grille
and out through the lower grille. The unit should never be placed
on soft surfaces such as beds or sofas; near computers, radios or
TV’s; or near sources of heat (such as stovetops or ovens). 
Operation
The operation of the unit is simple.
Power the unit by pressing the
On/Off button and then press the
button corresponding to the desired
speed. Your Electronic Air Purifier is
designed for continuous operation
which also provides maximum effi-
ciency in removing airborne polu-
tants.
Electronic Air Cleaner
Figure 2