Aten kh-0116 사용자 설명서
Chapter 1. Introduction
5
Components
KH0116 Front View
(Continues on next page.)
No.
Component
Description
1
Port LEDs
The Port LEDs provide status information about their
corresponding Computer Ports. There is one pair of LEDs for
each Port. The one on the left is the On Line LED; the one on
the right is the Selected Port LED:
corresponding Computer Ports. There is one pair of LEDs for
each Port. The one on the left is the On Line LED; the one on
the right is the Selected Port LED:
An On Line LED lights ORANGE to indicate that the
computer attached to its corresponding port is up and
running.
computer attached to its corresponding port is up and
running.
A Selected LED lights GREEN to indicate that the
computer attached to its corresponding port is the one that
has the KVM focus. The LED is steady under normal
conditions, but flashes when its port is accessed under
Auto Scan Mode (see F7 SCAN:, page 32).
computer attached to its corresponding port is the one that
has the KVM focus. The LED is steady under normal
conditions, but flashes when its port is accessed under
Auto Scan Mode (see F7 SCAN:, page 32).
When the KH0116 is first powered on, the On Line and
Selected LEDs blink in sequence as the Switch performs a
self-test.
Selected LEDs blink in sequence as the Switch performs a
self-test.
2
Reset Switch
Pressing this switch in performs a system reset.
Note: The switch is recessed and must be pushed with a thin
object - such as the end of a paper clip, or a ballpoint pen.
object - such as the end of a paper clip, or a ballpoint pen.
2
3
1
5
6
4
kh0116-v2.book Page 5 Wednesday, March 22, 2006 4:53 PM