NHT superone 사용자 가이드

Additionally, the SuperOne is easily mounted to a wall, using the two pre-drilled threaded inserts centered on the back

panel of the SuperOne, just above the terminal cup.  These 1/4” x 20 inserts are designed to accommodate the OmniMount

STMP-50 series mounting bracket (OmniMount: 602-829-8000).  Before attempting this installation, carefully evaluate the

mounting surface, making sure that its composition and construction are strong enough to support the load safely.  If you

are unsure about the type or use of mounting hardware for your installation, consult a professional contractor or a knowl-

edgeable hardware store.

The SuperOnes may also be placed on a shelf or in a cabinet, however this placement may not yield the best sound.  For

best results, place the speakers flush with the front, and not pushed back on the shelf.

When using the SuperOnes in a five-channel home theater configuration, it is ideal for all five speakers to be placed

equidistant from the listening position.  When using a SuperOne as a center channel speaker, it should be placed directly

above or below the television, as close to the screen as possible.  It may be placed either in the vertical or horizontal

orientation.  The SuperOne is magnetically shielded and will not distort the picture’s color.  If possible, all three front

speakers in a home theater system should be placed at equal height and at ear level from the listening position.  We rec-

ommend using the NHT SuperCenter as a center channel speaker, which is timbre-matched to the SuperOne.

Experimentation is the key to finding the best arrangement in your particular listening environment.  Be patient, have fun,

and remember that small changes in speaker position can sometimes have a significant effect on the sound.  For

example, moving the speakers nearer to a room boundary (walls, corners) will tend to increase their bass output, but may

result in “boomy” or “muddy” sound.  Conversely, situating the speakers farther away from room boundaries will tend to

decrease their bass output, but may result in greater articulation and better imaging.

In addition, room furnishings play an important role in absorbing and reflecting soundwaves.  Midrange and high

frequencies in particular will be absorbed by soft furnishings such as sofas, carpets and curtains.  A large number of these

soft furnishings will dull the sound, while a “live” room with few furnishings will brighten the sound.  If you are willing to

spend some time fine-tuning the performance of your system, you will enjoy the benefits for years to come.

„

„ Connections

The NHT SuperOne is compatible with virtually all quality amplifiers.  Proper wiring of the speakers is essential to good

sound.  At a minimum, 16AWG wire is recommended for runs of 10 feet or less, with heavier special purpose speaker wire

used for longer runs.  For specialty wire considerations, consult your local authorized NHT retailer.  For best results, use

equal length runs of wire for the left and right speakers.  Prepare your speaker wire by stripping 1/4” to 3/8” of insulation

from the ends and twisting the exposed wire strands tightly.  The five-way binding posts on the back of the speaker will

accept raw wire, banana plugs or spade plugs.  Tighten the binding posts by hand, as pliers can strip or break them.

(black) terminals. All speaker wires have some sort of marking along one or both conductors to help you make the

correct connections.  Incorrect speaker phase is indicated by weak bass and the lack of a well-defined stereo image.

D

1.5 x D

Speaker
Plane

Center of
Speaker
Plane

Fig. 1