American Dynamics edvr 작동 가이드
Basic Operations
25
Search
1 Full List
Enter
2 Alarm List
Enter
3 Search Filter
Enter
4 Thumbnail
Enter
5 SD Card
Enter
6 CD
Enter
7 Exit
Enter
enter: select
/
: item
>
HD NO. Date Time Alarm
HD1 0001 05/11/2006 12:15:03PM
1 VLOS
0002 05/11/2006 14:30:43PM
4 VLOS
0003 05/16/2006 11:14:23PM
1 SENS
0004 05/16/2006 12:20:25PM
2 SENS
0005 05/16/2006 16:37:13PM
1 VLOS
0006 05/16/2006 19:25:53PM
1 VLOS
0007 05/17/2006 03:20:23PM
4 SENS
0008 05/17/2006 07:34:26PM
1 SENS
0009 05/17/2006 08:36:23PM
1 SENS
0010 05/18/2006 12:20:43PM
4 VLOS
Search Filter
Complete the following steps to proceed with the time-list search function.
1. Press the SEARCH button to enter the search mode.
2. Select Search Filter and press the ENTER button to access the Search Filter page.
3. The Alarm Filter can search four modes: Disable, Sensor, V-Loss, and Motion.
4. Set the channel number you wish to search for the recorded video.
Note
Highlight each channel using the arrow buttons. Use the shuttle ring to select the channel.
5. Set the date period you wish to search for the recorded video.
6. Set the time period you wish to search for the recorded video.
7. Select Search List on the Search Filter page and press the ENTER button to start searching for and
displaying the desired image.
8. If no video is found, return to the Search Filter page and repeat steps 3 through 7 to initiate another search.
Note
From the following figures, refer to the figure that depicts your system (that is 4CH, 9CH, or 16CH).