Baumatic bfe320 사용자 설명서

169890

Caution! After unscrewing any of the fi xing hinges,

hold the door to prevent it from falling and causing
damage.

Any parts that you remove from the appliance whilst

reversing the door, should be retained for later use.

Required tools; socket spanner nr. 8, screwdriver, torx 25.
• Remove the upper hinge cover from both sides of the

appliance.

• WHILST SUPPORTING THE DOOR, unscrew upper hinge

screws and remove the upper door from the middle hinge.

• On the bottom side of the upper door unscrew the swing

stopper screws and remove the stopper (A). Fix the attached
stopper with its bearing on the opposite side of the door.

• Unscrew the forced door closure system (B) and fi x it to the

opposite side of the door (certain models only).

• Unscrew the middle hinge screws and remove the door from

the bottom hinge.

• Unscrew the leg holder fi xing screws.
• Tilt the appliance backward at a maximum angle of 35°.

Unscrew the leg support screws (C) - left and right, and
remove the leg support cover (D). Then place it on the
opposite side.

Reversing the door of
your appliance

169890en.indd 20

16.10.2006 11:36:30