Baumatic bv14a 사용자 설명서
162579
ENSURE YOU CONNECT THIS APPLIANCE TO A
SUPPLY RATED AT 220-240V (or 200-230V) and 50HZ.
NOTE: the supporting structure is constructed
in panels of treated sheet steel, electrostatically
enamelled to resist ill-treatment and to give long-
lasting beauty and shine.
enamelled to resist ill-treatment and to give long-
lasting beauty and shine.
Do not attempt to alter the specifi cations of this
appliance. Doing so could damage the machine,
cause injury & invalidate your warranty. DO NOT USE
ADAPTERS/SHUNTS.
cause injury & invalidate your warranty. DO NOT USE
ADAPTERS/SHUNTS.
Do not allow children to play with, near or inside this
appliance.
Do not pull on the power supply cable to free the plug
from the wall!
Do not attempt to use your appliance outdoors or any
place where it is likely to come into contact with the
elements.
elements.
Do not pull out or insert the plug with wet hands.
Before any cleaning or maintenance work, ensure
that the appliance has been disconnected from the
power supply.
that the appliance has been disconnected from the
power supply.
Never allow the back coils of the Appliance to come
into contact with any wall surface. ALWAYS ENSURE
THAT THE SPACE INTO WHICH YOU ARE PLACING
YOUR APPLIANCE IS FREE OF STORED ITEMS SUCH
AS PAPERS OR OTHER FLAMMABLE MATERIALS.
THAT THE SPACE INTO WHICH YOU ARE PLACING
YOUR APPLIANCE IS FREE OF STORED ITEMS SUCH
AS PAPERS OR OTHER FLAMMABLE MATERIALS.
NEVER block the VENTILATION OPENINGS OF THE
APPLIANCE EITHER INSIDE OR ON ITS EXTERIOR.
IT IS VITAL TO KEEP YOUR APPLIANCE WELL
VENTILATED SO THAT THERE IS PROPER AIR FLOW
BETWEEN THE BOTTOM OF THE UNIT AND THE
PLINTH / KICK PLATE ON WHICH IT IS SITTING.
IT IS VITAL TO KEEP YOUR APPLIANCE WELL
VENTILATED SO THAT THERE IS PROPER AIR FLOW
BETWEEN THE BOTTOM OF THE UNIT AND THE
PLINTH / KICK PLATE ON WHICH IT IS SITTING.
WARNING - DO NOT DAMAGE THE REFRIGERANT
CIRCUIT. AT THE END OF THE FUNCTIONAL LIFE
OF THE EQUIPMENT (WHICH USES COOLING
GAS R600o (ISOBUTANE) AND INFLAMMABLE
GAS INSIDE THE INSULATING FOAM, IT MUST BE
PLACED IN SAFETY BEFORE SENDING IT FOR
PROPER WASTE DISPOSAL.
OF THE EQUIPMENT (WHICH USES COOLING
GAS R600o (ISOBUTANE) AND INFLAMMABLE
GAS INSIDE THE INSULATING FOAM, IT MUST BE
PLACED IN SAFETY BEFORE SENDING IT FOR
PROPER WASTE DISPOSAL.
4
Electrical safety