Panasonic DMC-FH22 사용자 가이드

  Connect the camera to a PC via the USB connection cable A 

• Do not use any other USB connection cables except the supplied one.  

Use of cables other than the supplied USB connection cable may cause a 
malfunction.

USB MODE

PLEASE SELECT
THE USB MODE

PictBridge(PTP)

PC

• If [USB MODE] 

 is set to [PC] in the [SETUP] menu in 

advance, the camera will be automatically connected to the 
PC without displaying the [USB MODE] selection screen. 
Since there is no need to set this each time you connect to 
the PC, it is convenient.

• When the camera has been connected to the PC with 

[USB MODE] set to [PictBridge(PTP)], a message may appear on the PC’s 
screen. Select [Cancel] to close the screen, and disconnect the camera from the 
PC. Then set [USB MODE] to [PC] again.

• When using a Macintosh, the drive is displayed on the desktop. (“LUMIX”, 

“NO_NAME” or “Untitled” is displayed.)

„

„

• Proceed with the hardware removal using “Safely Remove Hardware” on the task tray 

of the PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD 
monitor of the digital camera before removing the hardware.

• This unit cannot stand upright when the AC adaptor is connected. When operating it on 

a flat surface, we recommend placing it on a soft cloth.

• Turn the camera off before connecting or disconnecting the AC adaptor (optional).
• Before inserting or removing a card, turn the camera off and disconnect the USB 

connection cable. Otherwise, data may be destroyed.