Panasonic dmc-ls1 사용자 설명서
Preparation
23
VQT0Q58
Setting Date/Time (Clock Set)
∫ Initial setting
The clock is not set when the camera is
shipped. When you turn the camera on, the
following screen appears.
The clock is not set when the camera is
shipped. When you turn the camera on, the
following screen appears.
• When pressing the [MENU] button, the
screen shown in step 1 appears.
• The screen disappears in about
5 seconds. Turn the camera on again or
select [CLOCK SET] on the [SETUP]
menu and then set the clock. (P24)
select [CLOCK SET] on the [SETUP]
menu and then set the clock. (P24)
1 Set date and time.
•
2/1: Select the desired item.
•
3/4: Set date and time.
2 Select [M/D/Y], [D/M/Y] or [Y/M/D].
• Close the menu by pressing the
[MENU] button 2 times after finishing
the setting.
the setting.
• Check if the clock setting is correct,
after turning the camera off and on.
• When new batteries or fully charged
Ni-MH batteries have been inserted for
more than 3 hours, the clock setting will
be stored (in the camera) for at least
3 months even if the batteries are
removed. (The storing time may be
shorter if the batteries are not charged
sufficiently.)
If more than 3 months has passed, the
clock setting will be lost. In this case, set
the clock again.
more than 3 hours, the clock setting will
be stored (in the camera) for at least
3 months even if the batteries are
removed. (The storing time may be
shorter if the batteries are not charged
sufficiently.)
If more than 3 months has passed, the
clock setting will be lost. In this case, set
the clock again.
• You can set the year from 2000 to 2099.
The 24-hour system is used.
• If you do not set the date, the date cannot
be printed when you go to a photo studio
for digital printing.
for digital printing.
• For the date print setting, refer to P73.
PLEASE SET THE CLOCK
CLOCK SET
MENU
M/D/Y
JAN
1
1 2005
.
.
0
0 00
:
CLOCK SET
EXIT
MENU
SET
SELECT
EXIT
10:00
1
DEC.
1
1.2005
MENU
M/D/Y
CLOCK SET
SET
SELECT
VQT0Q58ENG.book 23 ページ 2005年2月3日 木曜日 午後7時0分