Panasonic HDC-SD100 사용자 가이드
24
VQT1T90
" [SETUP]
[CLOCK SET] (
[CLOCK SET] (
26)
[DISPLAY]
[DATE/TIME] (
26)
[DATE FORMAT] (
26)
[POWER SAVE]
[QUICK POWER ON] (
34)
[QUICK START] (
34)
[BEEP SOUND]
[POWER LCD] (
29)
[LCD AI]
*1
(
30)
[LCD SET] (
29)
[EVF SET] (
29)
[COMPONENT OUT] (
88)
[HDMI RESOLUTION] (
87)
[VIERA Link] (
89)
[TV ASPECT] (
86)
[AV JACK] (
88)
[INITIAL SET]
[FORMAT CARD] (
83)
[DEMO MODE]
" [LANGUAGE] ( 23)
The screen indications are selected as shown
in the illustration below.
in the illustration below.
[OFF]
[ON]
[OFF]:
The power saving function is not activated.
[5 MINUTES]:
When about 5 minutes have passed without
any operation, this unit automatically turns off
to save battery life.
The power save function will not activate
The power saving function is not activated.
[5 MINUTES]:
When about 5 minutes have passed without
any operation, this unit automatically turns off
to save battery life.
The power save function will not activate
when:
$connected to AC adaptor
$using the USB for PC, DVD burner, printer
$PRE-REC is used
$connected to AC adaptor
$using the USB for PC, DVD burner, printer
$PRE-REC is used
This allows operations such as starting and
ending recording to be signaled by a beep.
1 Beep
When you start recording
When you turn on the power
When this unit is recognised by the PC or the
printer, etc.
2 Beeps
When you pause recording
When you turn off the power
2 Beeps for 4 times
When an error occurs. Check the sentence
displayed on the screen. (
ending recording to be signaled by a beep.
1 Beep
When you start recording
When you turn on the power
When this unit is recognised by the PC or the
printer, etc.
2 Beeps
When you pause recording
When you turn off the power
2 Beeps for 4 times
When an error occurs. Check the sentence
displayed on the screen. (
119)
1h30m
R 1h20m
Output from the AV/headphone output
terminal can be set to [AV OUT] or [PHONE].
[AV OUT]:
When AV cable is used
[PHONE]:
When headphone is used
You will hear a buzzing sound when it is set
terminal can be set to [AV OUT] or [PHONE].
[AV OUT]:
When AV cable is used
[PHONE]:
When headphone is used
You will hear a buzzing sound when it is set
to [AV OUT] while using a headphone.
Set to [YES] for changing the menu settings
back to the default condition.
(Settings for [CLOCK SET] and [LANGUAGE]
will not be changed.)
back to the default condition.
(Settings for [CLOCK SET] and [LANGUAGE]
will not be changed.)
This item is used to start the unit
demonstration.
(Only when the mode dial is at the
demonstration.
(Only when the mode dial is at the
position)
If [DEMO MODE] is switched [ON] when there
is no SD card inserted, the demonstration
automatically starts. If any operation takes
place, the demonstration is cancelled.
However if no operations take place for
approx. 10 minutes, the demonstration
automatically starts again. To stop the
demonstration, set [DEMO MODE] to [OFF] or
insert an SD card.
If [DEMO MODE] is switched [ON] when there
is no SD card inserted, the demonstration
automatically starts. If any operation takes
place, the demonstration is cancelled.
However if no operations take place for
approx. 10 minutes, the demonstration
automatically starts again. To stop the
demonstration, set [DEMO MODE] to [OFF] or
insert an SD card.