Panasonic PV-GS400 사용자 가이드
Editing Mode
57
≥The [PRINT] Indication does not appear when
the card is not inserted in the Camcorder. (You
cannot print pictures.)
cannot print pictures.)
≥When the [PRINT] Indication keeps blinking
(more than about 1 minute), the Camcorder and
the printer are not connected properly. Connect
the cable again or check the printer.
the printer are not connected properly. Connect
the cable again or check the printer.
≥When the Camcorder and the printer are
connected in the Tape Recording/Playback
Mode, the [WEB
Mode, the [WEB
] or the [WEB
]
Indication may appear on the LCD Monitor.
However, images cannot be printed.
However, images cannot be printed.
3
Select the desired picture.
≥Images cannot be printed when they are
≥Images cannot be printed when they are
displayed in Multi-Picture Mode.
4
When printing with date:
Set [PICTURE PLAYBACK MENU] >>
[PRINT] >> [DATE] >> [ON].
Set [PICTURE PLAYBACK MENU] >>
[PRINT] >> [DATE] >> [ON].
≥You cannot set date printing when the printer
does not support it.
≥Proceed to the next step if you do not need
date printing.
5
Set [PICTURE PLAYBACK MENU] >>
[PRINT] >> [THIS PICTURE] >> a desired
paper size.
[PRINT] >> [THIS PICTURE] >> a desired
paper size.
≥You cannot set a paper size which is not
supported by the printer.
6
Press the [
or [
6] Button
to select a desired number of prints.
≥You can set the number of prints up to 9.
7
Press the [ENTER] Button
MENU
STILL
FADE
ENTER
MENU
STILL
FADE
ENTER
FADE
ENTER
STILL
FADE
ENTER
STILL
If you want to stop printing halfway
Press the [
Press the [
∫] Button
≥Do not operate as follows during printing,
pictures cannot be printed properly.
≥Disconnecting the USB Cable
≥Removing the Card
≥Switching the operation mode
≥Removing the Card
≥Switching the operation mode
≥If the Camcorder is disabled while it is
connected to the printer, connect the USB
connection cable again or check the printer.
connection cable again or check the printer.
PV-GS400Eng.book 57 ページ 2004年6月4日 金曜日 午後3時17分