Panasonic VDR-D105 작동 가이드

LSQT1040

∫ [

≥ OFF

≥ ON

The screen indications are selected as shown 
in the illustration below.

∫ [

≥ OFF

≥ ON

This allows operations such as starting and 
ending recording to be signaled by a beep.
When [OFF] is set, no beep is heard when an 
operation such as recording is started or 
ended.

1 Beep
When you start recording
When you turn on the power
2 Beeps
When you pause recording
When you turn off the power
2 Beeps for 4 times
When an error occurs e.g. recording not 
starting. Check the sentence displayed on the 
screen. (l 82)

∫ [

≥ OFF

≥ 5 MINUTES

[OFF]: The power saving function is not 

activated.

When about 5 minutes passed without 
any operation, this unit automatically 
turns off to prevent the battery from 
running down. When you use this unit, 
turn it on again.

≥ When using the AC adaptor, the unit will not 

turn off even if you set this to [5 MINUTES].

∫ [

≥ YES

≥ NO

When there is a menu that cannot be selected 
depending on a combination of functions, set to 
[YES] for changing the menu settings back to 
the initial shipping condition.
(Language setting cannot be back to the initial 
shipping condition.)

∫ [

≥ OFF

≥ ON

This item is used to start the unit 
demonstration.
(Only when using the AC adaptor and the mode 
dial is at the 

 position)

If you set this to [ON] without inserting a disc, 
this unit is automatically set to the 
demonstration mode for introducing its 
functions. If any button is pressed or operated, 
the demonstration mode is canceled. If no 
operations take place for approx. 10 minutes, 
the demonstration mode automatically starts. 
To terminate the demonstration mode, insert a 
disc, or set this to [OFF]. For normal use, set 
this function to [OFF].

;

;

EIS

D105(P)eng.book  79 ページ  ２００６年１月１６日　月曜日　午後４時１分