Panasonic SDR-T55 사용자 가이드

VQT2N91

Flashing with approx. 4 second period 
(off for approx. 2 seconds, on for approx. 
2 seconds):
≥ The battery may be over-discharged, or 

the battery temperature may be high or 
low. The battery will charge, but it may 
take several hours for normal charging to 
begin.

Flashing with approx. 0.5 second period 
(off for approx. 0.25 second, on for 
approx. 0.25 second):
≥ The battery is not charged. Remove the 

battery from the unit, and try charging 
again.

≥ Check that the terminals of the unit or 

battery are not dirty or covered in a foreign 
object, and connect the battery correctly 
once again. If a foreign object or dirt is 
present, turn off the unit before removing.

≥ The battery or environment is at an 

extremely high or low temperature. Wait 
until the temperature has returned to an 
appropriate level and try charging again. If 
you are still unable to charge, there may 
be a fault in the unit, battery or AC 
adaptor.

Lamp turns off:
≥ Charging has finished.
≥ If the status indicator stays off despite the 

charging being unfinished, there may be a 
fault in the unit, battery or AC adaptor.

≥ Refer to page 109 for details on the 

battery.

≥ The memory capacity indicated on the 

label of an SD card is the total of the 
capacity for copyright protection and 
management and the capacity which can 
be used on the unit, a PC etc.

≥ Do not apply strong shocks, bend, or drop 

the SD card.

≥ Electrical noise, static electricity or the 

failure of this unit or the SD card may 
damage or erase the data stored on the 
SD card.

≥ During long periods of use, it is normal for 

this unit and the SD card to become 
slightly warm and is not a malfunction.

j Remove the SD card
j Turn the unit off
j Insert and remove the USB cable
j Expose the unit to vibrations or shock

Cautionary points when handling
≥ Do not expose the terminals of the SD 

card to water, garbage or dust.

≥ Do not place SD cards in the following 

areas:
j Areas exposed to direct sunlight, or in 

high-temperature areas such near 
heating equipment.

j In very dusty or humid areas.
j Locations susceptible to significant 

difference in temperature (condensation 
can occur).

j Where static electricity or 

electromagnetic waves occur.

≥ To protect SD cards, return them to their 

cases when you are not using them.

When disposing of or giving away an SD 
card, note that:
≥ Formatting and deletion simply change the 

file management information and cannot 
be used to completely erase the data in an 
SD card.

≥ We recommend that you physically format 

an SD card before disposing of or giving 
away the SD card.