Panasonic DBS 576 기술 매뉴얼
Section 700 - Operation
Chapter 3. System Features
576-50-700
DBS 576 (USA) issued September 2001
3-47
Network Call Routing
Network Call Routing allows multiple systems that are interconnected in a network, to direct calls to a
specific tie line based on the number dialed. The call does not leave the network.
Network Call Transfer
Network Call Transfer allows a call at an extension to be transferred to another extension in the
network.
Network Centralized Attendant
Network Centralized Attendant allows one primary attendant group in the network to handle network
attendant calls.
Related Programming
•
FF6-2-07: Closed Numbering
Network Centralized Voice Mail
Network Centralized Voice Mail allows one primary voice mail system to support the network. (This
feature does not apply to integrated Voice Mail or Built-In Voice Mail.)
Related Programming
•
FF6-2-04: Route Table: Digit Modify Pattern No.
•
FF6-2-05: Digit Modify Table - Add Ending Digits
•
FF6-2-05-0005: Numbering Plan
•
FF6-2-06: Authorization Code (UK Only)
•
FF6-2-09-0001: Dialing Access Voice Mail System
•
FF1-0-04: Trunk COS (Priority Message - Waiting Send/Cancel)
•
FF8-1-05: Call-Forward ID Codes for Voice Mail
•
FF8-1-06: MSG Key ID Codes (USA only)
Network Extension Calling
Network Extension Calling allows you to reach an extension on another PBX. Based on the number
you dial, the System network routes the call automatically.
Network Flash Transfer
When three or more systems are networked together with one System as the tandem, Network Flash
Transfer determines where a call is held when Network Hold is pressed.
Related Programming
•
FF1-0-04: Trunk COS (Network Flash Forwarding)
Network Hold
Network Hold allows the user to place a call on hold by pressing a programmed line key or MCO key.
When using Network Hold, you cannot establish a conference call between nodes, and only one party
can place the call on hold.