Whistler wgpx-545 사용자 가이드
12
Whistler WGPX-545/550
Battery Installation
Follow these procedures to install the rechargeable battery:
1. Open the battery compartment cover by following the steps in Figure 11A.
2. Insert the battery (remove battery from bag) while observing correct polarity (+) and (-), as
shown in Figure 11B.
3. Close battery compartment cover.
Note: Charge and remove the battery when the unit will not be used for a long period of time.
Damage caused by a leaky or improperly charged battery is not covered under warranty. Check
with the battery manufacturer about their specific product warranty and disposal recommendations.
Damage caused by a leaky or improperly charged battery is not covered under warranty. Check
with the battery manufacturer about their specific product warranty and disposal recommendations.
Charging the Battery - In Home
Before using the GPS for the first time, we strongly suggest you fully charge the battery.
1. Insert the USB connector into the AC adapter.
2. Insert the other end of the USB cable into the power port under the GPS unit.
3. Plug the AC adapter into a wall outlet.
1. Insert the USB connector into the AC adapter.
2. Insert the other end of the USB cable into the power port under the GPS unit.
3. Plug the AC adapter into a wall outlet.
Battery Installation and Charging
Fig 11A
Fig 11B
Fig 11C