Wyse x50l 사용자 가이드
2
Refer to the figures and proceed as follows:
1. Install the Battery
With your mobile thin client turned off, insert battery in the
battery compartment located on the underside of the mobile thin
client and secure it by sliding the latches.
battery compartment located on the underside of the mobile thin
client and secure it by sliding the latches.
Caution: Fully charge the battery for four to eight hours
before first use in battery mode.
To Remove Battery - With your mobile thin client turned off and
disconnected from the power adapter, slide the battery lock to
unlock, and then slide and hold the battery release latch to
gently pull the battery out of the battery compartment.
To Remove Battery - With your mobile thin client turned off and
disconnected from the power adapter, slide the battery lock to
unlock, and then slide and hold the battery release latch to
gently pull the battery out of the battery compartment.
2. Connect the Power Cable
Plug the power adapter connector to the mobile thin client as
shown. Plug the AC power cable to the power adapter, and then
plug the other end of the power cable to a wall outlet.
shown. Plug the AC power cable to the power adapter, and then
plug the other end of the power cable to a wall outlet.
Note: You can connect the power adapter at any time with
the computer turned either on or off.
3. Turn On the Mobile Thin Client
Raise and adjust the lid, and press the power on/off button for
two seconds. When you release the power on/off button, the
power icon on the system indicators lights up.
To Turn Off the Mobile Thin Client - Press the power on/off
button, or go to Start | Turn Off Computer and click Turn Off.
two seconds. When you release the power on/off button, the
power icon on the system indicators lights up.
To Turn Off the Mobile Thin Client - Press the power on/off
button, or go to Start | Turn Off Computer and click Turn Off.
After turning on, the mobile thin client initially goes through
several boot sequence procedures before the operating system
loads. Information about setting up your server environment is
available in your product’s operating system administrators guide.
several boot sequence procedures before the operating system
loads. Information about setting up your server environment is
available in your product’s operating system administrators guide.
*Zero client not applicable.
Your mobile thin client makes connections through:
•
Wired Net/LAN
•
Wi-Fi
•
Express card provided by data carriers
•
Smart card*
•
Bluetooth*
*Smart card and Bluetooth are features for X90Le and X90LeW.
Information about connecting your mobile thin client to the Internet
is available in the product’s users guide.
is available in the product’s users guide.
Setting Up Your Mobile Thin Client
Configure
Default User Names and Passwords* (case sensitive)
Enhanced SLE
XPe / WES
Administrator
User Name
admin
Administrator
Password
admin
Administrator
User
User Name
thinuser
User
Password
thinuser
User
Making Connections
1
Warning: Listening to audio at high volume levels for extended durations can damage your
hearing.
2
Smart card slot is a feature for X90Le and X90LeW; insert with electrical contacts facing
upwards.
3
Not all USB devices are supported; check with Wyse or your Wyse representative to find out if a
particular device is supported on your mobile thin client.
*Express card slot accepts either ExpressCard/34 or ExpressCard/54 formats.
Views
Bottom View
1 Battery lock
2 Battery release latch
3 Battery
Front View
1 System indicator lights
2 Release latch
Back View
1 VGA port
2 LAN RJ45
Right View
1 Line out/Headset out
1
4 USB port (3)
3
2 Microphone in
5 Power adapter input
3 Smart card slot
2
6 Kensington lock slot
Left View
1 DVI port
3 SD card slot
2 USB port
4 Express card slot*