Panasonic KX-TG2740 사용자 가이드

You cannot make a call
even if there is a free line.

The unit does not display
the caller’s name and/or
phone number.

The display exits the Caller
List.

You cannot page the
handset or base unit.

You cannot answer a call
by lifting the handset off the
base unit or charger, or
pressing the dialing button
(

(0)

to 

(9)

, 

(#)

or 

(*)

).

You cannot redial by
pressing

(PAUSE/REDIAL)

on the handset or

(REDIAL/PAUSE)

on the

base unit

.

You cannot have a
conversation or listening to
messages using the
headset.

•If more than one other user is using the

handsets and base unit, you may not be able
to make a call. Try again later.

•You need to subscribe to a Caller ID service.

•Other telephone equipment may be interfering

with your phone. Disconnect it and try again.

•Other electrical appliances connected to the

same outlet may be interfering with the Caller
ID information.

•Telephone line noise may be affecting the

Caller ID information.

•The caller requested not to send his/her

information. See page 40.

•If a call is being transferred to you, the caller

information will not be displayed.

•Do not pause for over 60 seconds while

searching.

•The called handset is too far from the base unit.

•The called unit is in use. Try again later.

•If more than one other user is using the

handsets and base unit, you may not be able
to page. Try again later.

•When you set the line selection to “Line 1” or

“Line 2” and the call is being transferred to
you, press the relevant soft key (           or

) to answer the call.

•If the last number dialed was more than 32 digits

long, the number will not be redialed correctly.

•The button has a double function as either

redial or pause. It will redial the last number
dialed if pressed at the outset of a call (p. 35,
37). If another number has been dialed first, it
will operate as a pause button (p. 77).

•Make sure that an optional headset is

connected properly (p. 99).

•If “SP-phone” or “SP” is displayed on the

handset, press 

to switch to the headset.