Sony MDX-F5800 사용자 가이드
20
Switching the REAR/SUB
*
1
Press
(SEL)
and then press the
volume + (REAR) or – (SUB) button.
After 3 seconds, the display returns to normal
play mode.
play mode.
Selecting the desired item
Press
(SEL)
and the desired button
simultaneously.
(SEL)
+
(3)
: A.SCRL
*
2
(SEL)
+
(4)
: M.DSPL
(SEL)
+
(4)
: DEMO
*
1
(SEL)
+
(6)
: BEEP
*
3
(SEL)
+
(DSPL)
: DIM
After the mode setting is completed, the display
returns to normal play mode.
returns to normal play mode.
To cancel the item, press (SEL) and the desired
button simultaneously again.
button simultaneously again.
*1
When the unit is turned off.
*2
When MD or CD is played.
*3
The beep sound is output only when the built-in
amplifier is used.
amplifier is used.
Setting the equalizer (EQ3)
You can select an equalizer curve for 7 music
types (XPLOD, VOCAL, CLUB, JAZZ, NEW
AGE, ROCK, CUSTOM, and OFF (equalizer
OFF)).
You can store a different equalizer setting for
each source.
types (XPLOD, VOCAL, CLUB, JAZZ, NEW
AGE, ROCK, CUSTOM, and OFF (equalizer
OFF)).
You can store a different equalizer setting for
each source.
Selecting the equalizer curve
1
Press
(SOURCE)
to select a source
(Radio, MD or CD).
2
Press
(EQ3)
repeatedly to select the
desired equalizer curve.
Each time you press (EQ3), the item
changes.
changes.
To cancel the equalizing effect, select “OFF.”
Adjusting the equalizer curve
You can store and adjust the equalizer settings
for different tone ranges.
for different tone ranges.
1
Press
(SOURCE)
to select a source
(Radio, MD or CD).
2
Press
(EQ3)
repeatedly to select the
desired equalizer curve.
3
Adjusting the equalizer curve.
1
Press
(SEL)
repeatedly to select the
desired tone range.
Each time you press (SEL), the tone range
changes.
changes.
LOW
t
MID
t
HI (
t
BAL
t
FAD
t
LPF
t
SUB)
2
Press the volume +/– button
repeatedly to adjust to the desired
volume level.
repeatedly to adjust to the desired
volume level.
The volume level is adjustable by 1 dB
steps from –10 dB to +10 dB.
steps from –10 dB to +10 dB.
3
Repeat step
1
and
2
to adjust the
equalizer curve.
To restore the factory-set equalizer curve,
press (SEL) for 2 seconds.
After 1 second, the display returns to
normal play mode.
press (SEL) for 2 seconds.
After 1 second, the display returns to
normal play mode.
Note
When EQ3 is set to “OFF,” you cannot adjust the
equalizer settings.
When EQ3 is set to “OFF,” you cannot adjust the
equalizer settings.