Sensio 90018 사용자 가이드
6.
Plug the power cord into a 120 V AC electrical outlet.
7.
Press the desired speed button: HIGH, MED, or LOW; the button will illuminate.
To change speeds during Blender operation, press the desired speed button.
To change speeds during Blender operation, press the desired speed button.
IMPORTANT: As a safety feature, after 2 minutes of continuous processing,
the Blender will automatically shut itself OFF.
the Blender will automatically shut itself OFF.
8.
To stop processing, press the OFF/PULSE button. The speed button’s light will go out.
9.
Make sure blades have stopped rotating.
10.
If a scraper is needed to combine ingredients, lift the glass blending jar straight up
and off the motor housing to remove. Remove the lid or the measuring cap.
Use a long handle spoon or scraper to collect food from the sides of the jar.
and off the motor housing to remove. Remove the lid or the measuring cap.
Use a long handle spoon or scraper to collect food from the sides of the jar.
11.
Replace blending jar onto the motor housing. Replace lid assembly.
Press any power button to resume Blender operation.
Press any power button to resume Blender operation.
12.
Continue to blend until ingredients have reached desired consistency. When blending
is complete, press the OFF/PULSE button. The speed button’s light will go out.
Unplug the unit after use.
is complete, press the OFF/PULSE button. The speed button’s light will go out.
Unplug the unit after use.
13.
Make sure blades have stopped rotating. Lift the glass blending jar straight up
and off the motor housing to remove. NEVER TWIST THE GLASS BLENDING JAR TO REMOVE.
and off the motor housing to remove. NEVER TWIST THE GLASS BLENDING JAR TO REMOVE.
CAUTION: If the glass blending jar rotates during blending, immediately press the OFF/PULSE
button and wait for blades to stop operation; then remove and secure by tightening
the collar and blade assembly on blending jar.
button and wait for blades to stop operation; then remove and secure by tightening
the collar and blade assembly on blending jar.
- Do not touch blades
- Do not interfere with the blade movement
- Do not remove blending jar lid
PULSE
1.
For short bursts of power, press the OFF/PULSE button.
2.
The button’s power indicator light will illuminate as PULSE is active. Blades will stop
and the light will go out when pressure on the button is released.
and the light will go out when pressure on the button is released.
8
SO-304058_90018_IM r3:Layout 1 9/4/08 4:57 PM Page 8