3com 8807 참조 가이드
218
C
HAPTER
16: ACL C
OMMANDS
display acl
running-packet-filter
Syntax
display acl running-packet-filter { all | interface interface-type interface-
number | vlan vlan-id }
number | vlan vlan-id }
View
Any view
Parameter
all: Displays all the ACLs that have been applied (including the number-identified
ones and name-identified ones)
ones and name-identified ones)
interface interface-type interface-number: The port of the switch. Refer to the
description in the Port Module Command Manual for details. The ACL application
information on the specified port of a normal card displays when the parameter is
specified.
description in the Port Module Command Manual for details. The ACL application
information on the specified port of a normal card displays when the parameter is
specified.
vlan: Displays the ACL application information under the VLAN configured
through the service process card.
through the service process card.
vlan-id: the ID of the VLAN, in the range of 1-4094.
Description
Use the display acl running-packet-filter command to display the ACL
application information, including the name of the ACL, the name of the sub
items and the application state.
application information, including the name of the ACL, the name of the sub
items and the application state.
Example
# Display the ACL application information of port Ethernet3/1/1.
<SW8800> display acl running-packet-filter ethernet3/1/1
Ethernet3/1/1
Inbound:
Acl 4000 rule 0 running
# Display the ACL application information of VLAN2
<SW8800> display acl running-packet-filter vlan 2
Vlan 2
Inbound:
Acl 2000 rule 1 slot 6 running
display flow-temlate
Syntax
display flow-template [ default | interface interface-type interface-number |
slot slotid | user-defined ]
slot slotid | user-defined ]
View
Any view
Parameter
default: Displays the default flow template of the system.
interface interface-type interface-number: Displays the flow template applied on
the specified port.
the specified port.