3com 8807 참조 가이드
398
C
HAPTER
24: RIP C
ONFIGURATION
C
OMMANDS
default cost
Syntax
default cost value
undo default cost
View
RIP view
Parameter
value: The default routing cost to be set, ranging from 1 to 16. The default value is
1.
1.
Description
Use default cost command to set the default routing cost of an imported route.
Use the undo default cost command to restore the default value.
If no specific routing cost is specified when importing the route of another routing
protocol with the import-route command, the redistribution will be performed
with the default routing cost specified with the default cost command.
protocol with the import-route command, the redistribution will be performed
with the default routing cost specified with the default cost command.
Related command: import-route.
Example
# Set the default routing cost of the imported route of another routing protocol to
3.
3.
[3Com-rip] default cost 3
display rip
Syntax
display rip [ routing | vpn-instance ]
View
Any view
Parameter
routing: Displays RIP routing information.
vpn-instance: Displays VPN instance information.
Description
Use the display rip command to view the current RIP running state and its
configuration information.
configuration information.
Example
# Display the current running state and configuration information of the RIP.
<SW8800> display rip
RIP is running
public net VPN-Instance
Checkzero is on Default cost : 1
Summary is on Preference : 100
Traffic-share is off