3com 8807 참조 가이드
OSPF Configuration Commands
433
Description
Use the display ospf request-queue command to view the information about
the OSPF request-queue.
the OSPF request-queue.
Example
# Display the information of OSPF request-queue.
<SW8800> display ospf request-queue
The Router’s Neighbors is
RouterID: 1.1.1.1 Address: 1.1.1.1
Interface: 1.1.1.3 Area: 0.0.0.0
LSID:1.1.1.3 AdvRouter:1.1.1.3 Sequence:80000017 Age:35
display ospf
retrans-queue
Syntax
display ospf [ process-id ] retrans-queue
View
Any view
Parameter
process-id: ID of an OSPF process. The command is applied to all current OSPF
processes if you do not specify a process ID.
processes if you do not specify a process ID.
Description
Use the display ospf retrans-queue command to view information about the
OSPF retransmission queue.
OSPF retransmission queue.
Example
# Display information about the OSPF retransmission queue.
<SW8800> display ospf retrans-queue
OSPF Process 200 with Router ID 103.160.1.1
Retransmit List
The Router’s Neighbors is
RouterID: 162.162.162.162 Address: 103.169.2.2
Interface: 103.169.2.5 Area: 0.0.0.1
Retrans list:
Type: ASE LSID:129.11.77.0 AdvRouter:103.160.1.1
Type: ASE LSID:129.11.108.0 AdvRouter:103.160.1.1
Table 64 Description of the fields of the display ospf request-queue command
Field
Description
RouterID
Router ID of neighbor router
Address
Address of the interface, through which neighbor routers communicate with
the router
the router
Interface
Address of the interface on the network segment
Area
Number of an OSPF area
LSID:1.1.1.3 Link State ID of the LSA
AdvRouter
Router ID of the router originating the LSA
Sequence
Sequence number of the LSA, used to discover old and repeated LSAs
Age
Age in seconds of the LSA