3com 8807 참조 가이드
VPLS Configuration Commands
777
Example
# Display the MAC forwarding entries of VSI 3Com.
<SW8800> display mac-address vsi 3Com
MAC ADDR STATE VPN ID PEER AGING TIME
0004-0000-005b dynamic 150 Vlan-interface10 AGING
--- 1 mac address(es) found ---
display vpls connection
Syntax
display vpls connection [ vsi vsi-name ] [ peer peer-ip ] [ up | down | block ] [
verbose | statistics ]
verbose | statistics ]
View
Any view
Parameter
vsi: Specifies a VSI.
vsi-name: VSI name.
peer: Specifies a peer PE.
peer-ip: IP address of the peer PE.
up: Displays only the information of the Pseudowires (PWs) in Up state.
down: Displays only the information of the Pseudowires in Down state.
block: Displays only the information of the Pseudowires in Block state.
verbose: Displays the details of Pseudowires.
statistics: Displays the statistics of Pseudowires.
Description
Use the display vpls connection command to display the Pseudowire
information of the VSI. You can query the information of statistics of Pseudowires
by any combination of VSI name, peer IP address, and Pseudowire state.
information of the VSI. You can query the information of statistics of Pseudowires
by any combination of VSI name, peer IP address, and Pseudowire state.
Example
# Display the VC information of VSI 3Com.
<SW8800> display vpls connection vsi 3com
VSI name : 3com
MTU : 2000
Status : open
VCID EncapType PeerAddr state Lcl-Label/Rmt-Label TnlType/TnlID
200 vlan 2.2.2.2 down 131514/0 LSP/1
100 ethernet 3.3.3.3 down 131515/0 LSP/2
2 total connection(s):0 up, 0 block, 2 down
Table 98 Brief description on the fields of a VC
Field
Description
VSI name
VSI name