3com 8807 참조 가이드
IP Performance Configuration Commands
109
Example
# Display the total number of FIB entries.
<SW8800> display fib statistics
Route Entry Count : 30
display icmp statistics
Syntax
display icmp statistics
View
Any view
Parameter
None
Description
Use the display icmp statistics command to view the statistics information about
ICMP packets.
ICMP packets.
Related command: display ip interface, reset ip statistics.
Example
# View statistics about ICMP packets.
<SW8800> display icmp statistics
Input: bad formats 0 bad checksum 0
echo 5 destination unreachable 0
source quench 0 redirects 0
echo reply 10 parameter problem 0
timestamp 0 information request 0
mask requests 0 mask replies 0
time exceeded 0
Output:echo 10 destination unreachable 0
source quench 0 redirects 0
echo reply 5 parameter problem 0
timestamp 0 information reply 0
mask requests 0 mask replies 0
time exceeded 0
Table 13 Description on the fields of the display icmp statistics command
Field
Description
bad formats
Number of input packets in bad format
bad checksum
Number of input packets with wrong checksum
echo
Number of input/output echo request packets
destination
unreachable
unreachable
Number of input/output packets with unreachable destination
source quench
Number of input/output source quench packets
redirects
Number of input/output redirected packets
echo reply
Number of input/output echo reply packets
parameter problem
Number of input/output packets with parameter problems
timestamp
Number of input/output timestamp packets
information request
Number of input information request packets