3com 8807 참조 가이드
304
C
HAPTER
20: 802.1
X
C
ONFIGURATION
C
OMMANDS
Description
Use the dot1x supp-proxy-check command to configure the control method for
802.1x access users via proxy logon the specified interface.
802.1x access users via proxy logon the specified interface.
Use the undo dot1x supp-proxy-check command to cancel the control method
set for the 802.1x access users via proxy.
set for the 802.1x access users via proxy.
Note that when performing this function, the user logging on via proxy need to
run 3Com 802.1x client program,( 3Com 802.1x client program version V1.29 or
above is needed).
run 3Com 802.1x client program,( 3Com 802.1x client program version V1.29 or
above is needed).
This command is used to set on the specified interface when executed in system
view. The parameter interface-list cannot be input when the command is executed
in Ethernet Port view and it has effect only on the current interface. After globally
enabling proxy user detection and control in system view, only if you enable this
feature on a specific port can this configuration take effects on the port.
view. The parameter interface-list cannot be input when the command is executed
in Ethernet Port view and it has effect only on the current interface. After globally
enabling proxy user detection and control in system view, only if you enable this
feature on a specific port can this configuration take effects on the port.
Related command: display dot1x.
Example
# Configure the switch cut network connection to a user upon detecting the use
of proxy on Ethernet 2/1/1 through Ethernet 2/1/8.
of proxy on Ethernet 2/1/1 through Ethernet 2/1/8.
[SW8800] dot1x supp-proxy-check logoff
[SW8800] dot1x supp-proxy-check logoff interface Ethernet 2/1/1 to
Ethernet 2/1/8
# Configure the switch to send trap message upon detecting the use of proxy on
Ethernet 2/1/9.
Ethernet 2/1/9.
[SW8800] dot1x supp-proxy-check trap
[SW8800] dot1x supp-proxy-check trap interface Ethernet 2/1/9
or
[SW8800] dot1x supp-proxy-check trap
[SW8800] interface Ethernet 2/1/9
[3Com-GigabitEthernet2/1/9] dot1x supp-proxy-check trap
dot1x timer
Syntax
dot1x timer { handshake-period handshake-period-value | quiet-period
quiet-period-value | tx-period tx-period-value | supp-timeout
supp-timeout-value | server-timeout server-timeout-value }
quiet-period-value | tx-period tx-period-value | supp-timeout
supp-timeout-value | server-timeout server-timeout-value }
undo dot1x timer { handshake-period | quiet-period | tx-period |
supp-timeout | server-timeout }
supp-timeout | server-timeout }
View
System view
Parameter
handshake-period: This timer begins after the user has passed the
authentication. After setting handshake-period, system will send the handshake
packet by the period. Suppose the dot1x retry time is configured as N, the system
authentication. After setting handshake-period, system will send the handshake
packet by the period. Suppose the dot1x retry time is configured as N, the system