3com 8807 참조 가이드
RADIUS Protocol Configuration Commands
347
server-type
Syntax
server-type { 3com | portal| standard }
undo server-type
View
RADIUS scheme view
Parameter
3com: Configures the switch system to support the RADIUS scheme of 3Com
type, which requires the RADIUS client end (switch system) and RADIUS server to
interact according to the private RADIUS protocol regulation and packet format of
3Com Corporation Co., Ltd.
type, which requires the RADIUS client end (switch system) and RADIUS server to
interact according to the private RADIUS protocol regulation and packet format of
3Com Corporation Co., Ltd.
portal: RADIUS server cooperating with iTellin Portal system.
standard: Configures the switch system to support the RADIUS server of Standard
type, which requires the RADIUS client end (switch system) and RADIUS server to
interact according to the regulation and packet format of standard RADIUS
protocol (RFC 2138/2139 or newer).
type, which requires the RADIUS client end (switch system) and RADIUS server to
interact according to the regulation and packet format of standard RADIUS
protocol (RFC 2138/2139 or newer).
Description
Use the server-type command to configure the RADIUS scheme type supported
by the switch.
by the switch.
Use the undo server-type command to restore the RADIUS scheme type to the
default value.
default value.
The default RADIUS server type of a newly created RADIUS scheme is standard.
The RADIUS server type of the default RADIUS scheme (with a name of "system"),
which is created by the system, is 3com.
The RADIUS server type of the default RADIUS scheme (with a name of "system"),
which is created by the system, is 3com.
3Com Switch 8800 Family Series Routing Switches support standard RADIUS
protocol and the extended RADIUS service platform IP Hotel, 201+ and Portal etc
independently developed by 3Com Corporation. This command is used to select
the supported RADIUS scheme type.
protocol and the extended RADIUS service platform IP Hotel, 201+ and Portal etc
independently developed by 3Com Corporation. This command is used to select
the supported RADIUS scheme type.
Related command: radius scheme.
Example
# Set RADIUS scheme type of RADIUS scheme "3com", to 3com.
[3Com-radius-3com] server-type 3com
state
Syntax
state { primary | secondary } { accounting | authentication } { block | active }
View
RADIUS scheme view
Parameter
primary: Configures to set the state of the primary RADIUS server.