3com 8807 참조 가이드
484
C
HAPTER
26: I
NTEGRATED
IS-IS C
ONFIGURATION
C
OMMANDS
[SW8800] interface Vlan-interface 10
[3Com-Vlan-interface10] isis timer holding-multiplier 5
isis timer lsp
Syntax
isis timer lsp time
undo isis timer lsp
View
Interface view
Parameter
time: Specifies the LSP interval, ranging from 1 to 1000 and measured in
milliseconds. The default value is 33 milliseconds.
milliseconds. The default value is 33 milliseconds.
Description
Use the isis timer lsp command to configure the interval at which IS-IS sends
link-state packets on the interface.
link-state packets on the interface.
Use the undo isis timer lsp command to restore the default setting.
Related command: isis timer retransmit.
Example
# Set the LSP interval on Interface Vlan-interface 10 to 500 milliseconds.
[SW8800] interface Vlan-interface 10
[3Com-Vlan-interface10] isis timer lsp 500
timer lsp-generation
Syntax
timer lsp-generation x y z [ level-1 | level-2 ]
undo timer lsp-generation [ level-1 | level-2 ]
View
IS-IS view
Parameter
x: Maximum interval (in seconds) for generating LSP. It ranges from 1 to 120 and
defaults to 5.
defaults to 5.
y: Interval (in milliseconds) between each trigger operation and each LSP
generation operation. It ranges from 1 to 120,000 and defaults to 5,000.
generation operation. It ranges from 1 to 120,000 and defaults to 5,000.
z: Interval (in milliseconds) between two successive LSP generation operations. It
ranges from 1 to 120,000 and defaults to 5,000.
ranges from 1 to 120,000 and defaults to 5,000.
level-1: Sets interval for Level-1 LSP only.
level-2: Sets interval for Level-2 LSP only.