3com 8807 참조 가이드
Display Commands of the Routing Table
391
The integrated routing information includes total route amount, the route amount
added or deleted by protocol, amount of the routes that are labeled "Deleted"
but not deleted, and the Active route amount.
added or deleted by protocol, amount of the routes that are labeled "Deleted"
but not deleted, and the Active route amount.
Example
# Display the integrated route information.
<SW8800> display ip routing-table statistics
Routing tables:
Proto route active added deleted
DIRECT 24 4 25 1
STATIC 4 1 4 0
BGP 0 0 0 0
RIP 0 0 0 0
IS-IS 0 0 0 0
OSPF 0 0 0 0
O_ASE 0 0 0 0
O_NSSA 0 0 0 0
AGGRE 0 0 0 0
Total 28 5 29 1
display ip routing-table
vpn-instance
Syntax
display ip routing-table vpn-instance vpn-instance-name
View
Any view
Parameter
vpn-instance: Specifies VPN instance parameter.
vpn-instance-name: VPN instance name.
Description
Use the display ip routing-table vpn-instance command to view the routing
information about the VPN instance.
information about the VPN instance.
Example
# View the routing information about the VPN instance.
<SW8800> dis ip routing-table vpn-instance vpn49-1
vpn49-1 Route Information
Routing Table: vpn49-1 Route-Distinguisher: 49:1
Destination/Mask Protocol Pre Cost Nexthop Interface
Table 51 Description of the fields of the display ip routing-table statistics command
Field
Description
Proto
Routing protocol. O_ASE indicates OSPF_ASE routes, O_NSSA indicates OSPF_NSSA
routes and AGGRE indicates aggregated routes.
routes and AGGRE indicates aggregated routes.
Route
Number of routes
Active
Number of active routes
Added
Number of added routes after the router is rebooted or the routing table is cleared
last time
last time
Deleted Number of deleted routes (such routes will be freed in a period of time)
Total
Total number of the different kinds of routes