3com 8807 참조 가이드
914
C
HAPTER
53: SNMP C
ONFIGURATION
C
OMMANDS
snmp-agent trap
queue-size
Syntax
snmp-agent trap queue-size length
undo snmp-agent trap queue-size
View
System view
Parameter
length: Length of queue, ranging from 1 to 1,000. By default, the length is 100.
Description
Use the snmp-agent trap queue-size command to configure the information
queue length of Trap packet sent to Destination Host.
queue length of Trap packet sent to Destination Host.
Use the undo snmp-agent trap queue-size command to restore the default
value.
value.
Related command: snmp-agent trap enable, snmp-agent target-host,
snmp-agent trap life.
snmp-agent trap life.
Example
# Configure the queue length to 200.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] snmp-agent trap queue-size 200
snmp-agent trap source
Syntax
snmp-agent trap source vlan-interface vlan-id
undo snmp-agent trap source
View
System view
Parameter
vlan-id: Specifies the VLAN interface ID, ranging from 1 to 4094.
Description
Use the snmp-agent trap source command to configure the source address for
sending Trap.
sending Trap.
Use the undo snmp-agent trap source command to cancel the source address
for sending Trap.
for sending Trap.
You can use this command to configure to track specific event by using the trap
address.
address.
Example
# Configure the IP address of the VLAN interface 1 as the source address for
transmitting the Trap packets.
transmitting the Trap packets.