3com 8807 사용자 가이드

C

HAPTER

 15: P

ORT

 I

SOLATION

 C

ONFIGURATION

Configure the upstream port 
in the isolated group 

port-isolate uplink-port 
group isolate-group-id 

Required

■

You can configure the 
uplink port for the isolated 
group only after you create 
the isolated group

■

The upstream port can 
only be an Ethernet port

■

You can configure only 
one upstream port for one 
isolated group. And the 
uplink port can be an 
aggregation group, but 
not a static or dynamic 
aggregation group 

Query isolation information 

display port-isolate group [ 
isolate-group-id ] [ verbose ] 

You can carry out this 
command in any view

Table 96   Configuring an uplink port in the isolated group

Table 97   Configuring isolated ports for the isolated group

Enter system view 

system-view 

- 

Enter Ethernet port view

interface interface-type 
interface-number 

Required 

Configure isolated ports for 
the isolated group 

port-isolate group 
isolate-group-id 

Required

■

You can configure isolated 
ports for the isolated 
group only after you create 
the isolated group. The 
isolated port can only be 
configured as an Ethernet 
port

■

One port can join only one 
isolated port

■

One port can be either an 
isolated port or an uplink 
port, but not both an 
isolated port and an uplink 
port in the same isolated 
group

■

If the isolated port is a 
member of an aggregation 
group, other ports in the 
aggregation group will 
also join the isolated group 

Query isolation information 

display port-isolate group [ 
isolate-group-id ] [ verbose ] 

You can carry out this 
command in any view