3com 8807 사용자 가이드
Introduction to QoS Configuration Based on Port Groups
185
Table 157 Configure QoS based on port groups
Configuration procedure
Command
Description
Enter system view
system-view
-
Enable descriptor share on the
specified card
specified card
share descriptors slotid
This function is disabled by
default.
default.
Enter port group view
port-group index
Required
index: Port group number.
The port group number of a
common interface card
ranges from 1 to 128.
The port group number of a
common interface card
ranges from 1 to 128.
Add a port to the port group port interface-list
Required
interface-list={ interface-type
interface-number [ to
interface-type
interface-number ] }&<1-n>
interface-number [ to
interface-type
interface-number ] }&<1-n>
Display the configured
information of the port group
information of the port group
display port-group [ index ]
Optional
This command can be
executed in any view
executed in any view
Apply the flow template
flow-template
user-defined
user-defined
Optional
Activate the ACL
packet-filter inbound
Optional
Configure local priority of the
port group
port group
priority { priority-level | trust
}
}
Optional
Configure traffic policing
traffic-limit inbound
Optional
Configure traffic shaping
traffic-shape [ queue
queue-id ] max-rate burst-size
queue-id ] max-rate burst-size
Optional
Configure packet priority
traffic-priority inbound
Optional
Configure packet redirection
traffic-redirect inbound
Optional
Configure queue scheduling
algorithm
algorithm
queue-scheduler wrr {
group1 { queue-id
queue-weight } &<1-8> |
group2 { queue-id
queue-weight } &<1-8> }*
group1 { queue-id
queue-weight } &<1-8> |
group2 { queue-id
queue-weight } &<1-8> }*
Optional