3com 8807 사용자 가이드

C

HAPTER

 70: FTP&TFTP C

ONFIGURATION

The configuration of the switching as FTP server.

c 

You can use the following commands to enable/disable the FTP server on the 
switch. Perform the following configuration in system view.

FTP server supports multiple users to access at the same time. A remote FTP client 
sends request to the FTP server. Then, the FTP server will carry out the 
corresponding operation and return the result to the client.

By default, FTP server is disabled.

The authorization information of FTP server includes the path to the desired 
directory for FTP users. The FTP server service is available only for the authenticated 
and authorized users. The authorization information of FTP server includes the top 
working directory provided for FTP clients. You can use the following commands to 
configure FTP server authentication and authorization.

Perform the following configuration in corresponding view.

Table 753   Configuration of the switch as FTP server

Switch 

Start FTP server. 

FTP server is 
disabled 

You can view the 
configuration information of 
FTP server with the display 
ftp-server command 

Configure authentication and 
authorization for FTP server. 

- 

Configure username, 
password and authorized 
directory for FTP users 

Configure running parameters 
for FTP server. 

- 

Configure timeout time 
value for FTP server. 

PC 

Log into the switch from FTP 
client. 

- 

-

Table 754   Enable/disable FTP Server

Enable the FTP server 

ftp server enable 

Disable the FTP server 

Table 755   Configure the FTP Server Authentication and Authorization

Create new local FTP user and enter local user 
view (in System view) 

local-user { username | multicast [ domain 
domain-name ] ipaddress | 
password-display-mode { auto | 
cipher-force } }