3com 8807 사용자 가이드

■

Configuring the IGMP version

■

Configuring the IGMP query message interval

■

Configuring the IGMP querier present timer

■

Configuring the maximum query response time

■

Configuring the limit of IGMP groups on an interface

■

Adding a router to the specified multicast group.

■

Configuring the interval of sending IGMP Group-Specific Query packet

■

Configuring the number of times of sending IGMP Group-Specific Query 
packet

■

Deleting IGMP Groups Joined on an Interface

■

Configuring the Filtering Rule of Multicast Groups

■

Enabling/Disabling IGMP Fast Leaving

Only if the multicast function is enabled can the multicast-related configurations 
take effect.

Refer to “Enabling Multicast Routing” “Enabling Multicast Routing”.

This configuration task is to enable IGMP on the interface which needs to maintain 
the multicast membership. After this, you can initiate IGMP feature configuration.

Perform the following configuration in interface view.

By default, IGMP is disabled on the interface.

c 

■

If the VLAN VPN is enabled on a port, the IGMP Snooping feature cannot be 
enabled on the VLAN for the port, and the IGMP feature cannot be enabled on 
the corresponding interface either.

■

If IGMP Snooping feature is enabled on a VLAN, or IGMP is enabled on the 
interface, you cannot add the member port on which VLAN VPN is enabled 
into the VLAN.

With the compatibility control function enabled the switch processes the protocol 
message with the destination IP address 224.0.0.1 in the IGMP Report packet. 
Otherwise, the switch discards this kind of packets.

Perform the following configuration in system view.

Table 433   Enable/DisableIGMP on an interface

Enable IGMP on an interface 

igmp enable 

Disable IGMP on an interface