3com 8807 사용자 가이드

C

HAPTER

 70: FTP&TFTP C

ONFIGURATION

To upload a file, the client sends a request to the TFTP server and then transmits 
data to it and receives the acknowledgement from it. You can use the following 
commands to upload files.

Perform the following configuration in user view.

In the command, source-file indicates the file to be uploaded to server; dest-file 
indicates the saved-as name of the file on TFTP server; tftp-server indicates the IP 
address or host name of TFTP server.

The switch serves as TFTP client and the remote PC as TFTP server. Authorized TFTP 
directory is set on the TFTP server. The IP address of a VLAN interface on the switch 
is 1.1.1.1, and that of the PC is 1.1.1.2.

The switch application switch.app is stored on the PC. Using TFTP, the switch can 
download the switch.app from the remote TFTP server and upload the vrpcfg.cfg 
to the TFTP server under the switch directory for backup purpose.

Figure 191   Network diagram for TFTP configuration

1 Start TFTP server on the PC and set authorized TFTP directory.

2 Configure the switch

# Log into the switch (through local console or remote Telnet, refer to the Getting 
Started for login information), and then enter the system view.

<SW8800> system-view

 

[SW8800] 

c 

# Configure IP address 1.1.1.1 for the VLAN interface, ensure the port connecting 
the PC is also in this VALN (VLAN 1 in this example).

Table 761   Upload files by means of TFTP

Upload files by means of TFTP 

tftp tftp-server put source-file [ dest-file ]

Switch

PC

Network

Switch

Switch

PC

Network