3com 2948-SFP Plus 사용자 가이드

This section describes using the Command line Interface (ClI) to  
manage the device. The device is managed through the ClI from a 
direct connection to the device console port.

Using the ClI, network managers enter configuration commands and 
parameters to configure the device. Using the ClI is very similar to  
entering commands on a UnIX system.

To start using the ClI via a console port:

1  Connect the RJ-45 cable to the Console port of the switch to the  
 

serial port of the terminal or computer running the terminal  

 

emulation application.

2  Set the baud rate to 38400.

3  Set the data format to 8 data bits, 1 stop bit, and no parity.

4  Set Flow Control to none.

5  Under Properties, select VT100 for Emulation mode.

6  Select Terminal keys for Function, Arrow, and Ctrl keys. Ensure  
 

that the setting is for 

Terminal keys (not Windows keys).

logging on to the ClI: The login process requires a User name and 
Password. The default user name for first time configuration is 

admin. 

no password is required. User names and passwords are case sensitive.

To logon to the ClI Interface:

1  Press Enter without typing in a username. The Login prompt  
 

displays:

  Login:

2  Enter your User Name at The Login prompt.