3com 9000 설치 가이드
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
3
Introduction
The Gigabit Interface Converter (GBIC) ports on your system connect
to Gigabit Ethernet networks through a GBIC transceiver (Figure 1),
providing a high-speed connection over fiber-optic or copper cable.
The transceiver connects to the network using a fiber-optic duplex
subscriber connector (SC) or a RJ-45 connector. You can remove and
replace the transceiver with the system on (which is called hot-
swapping).
to Gigabit Ethernet networks through a GBIC transceiver (Figure 1),
providing a high-speed connection over fiber-optic or copper cable.
The transceiver connects to the network using a fiber-optic duplex
subscriber connector (SC) or a RJ-45 connector. You can remove and
replace the transceiver with the system on (which is called hot-
swapping).
Figure 1 GBIC Fiber-Optic Transceiver
This Guide describes how to install the following GBIC transceivers:
■
1000BASE-SX GBIC (3CGBIC91)
■
1000BASE-LX GBIC (3CGBIC92)
■
1000BASE-T GBIC (3CGBIC93)
■
1000BASE-LH70 GBIC (3CGBIC97)
GBICP2_2march03.fm Page 3 Wednesday, March 12, 2003 2:35 PM