3com S7906E 설치 설명서
1-21
To do…
Use the command…
Remarks
Display MLD SSM mappings
display mld ssm-mapping ipv6-group-address
Available
in any view
in any view
Display the IPv6 multicast
group information created
based on the configured MLD
SSM mappings
group information created
based on the configured MLD
SSM mappings
display mld ssm-mapping group
[ ipv6-group-address | interface interface-type
interface-number ] [ verbose ]
[ ipv6-group-address | interface interface-type
interface-number ] [ verbose ]
Available
in any view
in any view
Clear MLD multicast group
information
information
reset mld group { all | interface interface-type
interface-number { all | ipv6-group-address
[ prefix-length ] [ ipv6-source-address
[ prefix-length ] ] } }
interface-number { all | ipv6-group-address
[ prefix-length ] [ ipv6-source-address
[ prefix-length ] ] } }
Available
in user
view
in user
view
Clear Layer 2 port information
about MLD multicast groups
about MLD multicast groups
reset mld group port-info { all |
ipv6-group-address } [ vlan vlan-id ]
ipv6-group-address } [ vlan vlan-id ]
Available
in user
view
in user
view
Clear MLD SSM mappings
reset mld ssm-mapping group { all | interface
interface-type interface-number { all |
ipv6-group-address [ prefix-length ]
[ ipv6-source-address [ prefix-length ] ] } }
interface-type interface-number { all |
ipv6-group-address [ prefix-length ]
[ ipv6-source-address [ prefix-length ] ] } }
Available
in user
view
in user
view
You cannot use the reset mld group command to clear the MLD multicast group information of static
joins.
The reset mld group port-info command cannot clear Layer 2 port information about MLD multicast
groups of static joins.
The reset mld group command cause an interruption of receivers’ reception of multicast data.
MLD Configuration Examples
Basic MLD Functions Configuration Example
Network requirements
z
Receivers receive VOD information in the multicast mode. Receivers of different organizations
form stub networks N1 and N2, and Host A and Host C are multicast receivers in N1 and N2
respectively.
z
Switch A in the IPv6 PIM network connects to N1, and Switch B and Switch C connect to N2.
z
Switch A connects to N1 through VLAN-interface 100, and to other devices in the IPv6 PIM network
through VLAN-interface 101.
z
Switch B and Switch C connects to N2 through their own VLAN-interface 200, and to other devices
in the IPv6 PIM network through VLAN-interface 201 and VLAN-interface 202 respectively.