3com S7906E 설치 설명서

 

1-12 

Configure dynamic member 
port aging time  

host-aging-time interval 

Optional 

260 seconds by default  

 

Follow these steps to configure aging timers for dynamic ports in a VLAN:  

Enter system view 

— 

Enter VLAN view 

vlan vlan-id 

— 

Configure dynamic router port 
aging time 

mld-snooping 
router-aging-time interval 

Optional 

260 seconds by default  

Configure dynamic member 
port aging time  

mld-snooping 
host-aging-time interval 

Optional 

260 seconds by default  

 

If all the hosts attached to a port is interested in the IPv6 multicast data addressed to a particular IPv6 

multicast group, you can configure that port as a static member port for that IPv6 multicast group.  

You can configure a port of a switch to be a static router port, through which the switch can forward all 

IPv6 multicast data it received. 

Follow these steps to configure static ports:  

Enter system view 

— 

interface interface-type 
interface-number 

Enter Ethernet port/ONU 
port/Layer 2 aggregate 
interface view or port group 
view 

port-group manual 
port-group-name 

Required 

Use either approach 

Configure the port(s) as static 
member port(s)  

mld-snooping static-group 
ipv6-group-address [ source-ip 
ipv6-source-address ] vlan 
vlan-id 

Required 

No static member ports by 
default  

Configure the port(s) as static 
router port(s)  

mld-snooping 
static-router-port vlan vlan-id 

Required 

No static router ports by default